Inside Out Car Care

Paint Correction Services

Reduce swirls. Refine the reflection.

Reflections in blue paint
Reflections in blue paint

Correction, not concealment

Paint correction addresses imperfections in the paint surface. Our trained and certified paint correction specialist chooses the right machine and the right combination of buffing pads, abrasive compounds and polishes to reach the result we’re after. We select the stages based on the condition of your paint and the finish you want. That’s different from temporarily hiding marks with fillers like waxes and silicone.

What the work covers

  • The test spot: We test a small 2×2 foot section of the paint with a chosen pad and compound or polish to find the least aggressive method that still reaches the target result.
  • Compounding and polishing: We work a rotary or dual-action buffer in precise, overlapping passes with moderate pressure to safely level the microscopic peaks of the clear coat around the scratches.
  • Inspection and protection: We wipe the panel with an isopropyl alcohol (IPA) panel wipe to strip polishing oils, inspect the finish under dedicated lighting, and seal the corrected paint with a wax, sealant or ceramic coating.
  • Compounding, polishing and refining as needed
  • Inspection under lighting to assess the finish

Our methodical paint prep process

Every paint protection package and the Ceramic Rejuvenation Package start with it.

  1. 1Thorough prep wash of all exterior surfaces
  2. 2Tires cleaned of silicone and dressings
  3. 3Bug and tar removal
  4. 4Light clay bar to remove contaminants embedded in the clear coat
  5. 5Water and mineral decontamination from the paint
  6. 6Deep cleaning of rims and barrels
  7. 7Meticulous cleaning around emblems
  8. 8Door jambs, trunk jambs and fuel door cleaned
  9. 9Stripper wipe-down to remove all wax, oil and silicone from exterior surfaces

Before and after

The same blue hood before and after paint correction. The two shots are framed a little differently.

Common paint defects

Common paint defects we correct: swirl marks, deep marring, deep scratches, acid and water etching, and holograms

Levels of paint correction

Gloss Enhancement

Gloss & Depth

What it is
A polish designed to restore shine and depth rather than remove defects.
Defect removal
It doesn’t really remove defects; it covers them up for a period of time.
Best for
Newer vehicles in decent condition, daily drivers with minimal wear, or budget-conscious detailing where the main goal is gloss and depth.
Time
Quickest turnaround.

Level 1 Paint Correction

Enhancement & Light Polish

What it is
A single medium-cut or all-in-one diminishing abrasive polish with a single polishing pad, applied with a DA buffer.
Defect removal
Removes roughly 50% to 60% of light swirl marks, minor micro-scratches and light oxidation.
Best for
Newer vehicles in decent condition, daily drivers with minimal wear, or budget-conscious detailing where the goal is gloss and depth rather than a 100% defect-free surface. Also a standard prep stage before a ceramic coating, depending on the condition of the paint.
Time
Up to 2 hours.

2-Step Paint Correction

Cut & Polish

What it is
An aggressive cutting compound with a heavy pad, applied by rotary or DA buffer, to level deeper defects, followed by a finer finishing polish with a soft pad to clear haze and micro-marring.
Defect removal
About 60% to 85% of moderate to heavy swirl marks and scratches.
Best for
Dark-colored or black vehicles, cars with moderate wash-induced swirls, and as a standard prep stage before a ceramic coating. Widely considered the best overall value.
Time
Up to 4 hours.

3-Step Paint Correction

Heavy Compound, Intermediate & Ultra-Fine Polish

What it is
A multi-stage restoration with heavy cutting (sometimes wool pads or heavy compounds) on a rotary buffer, then an intermediate smoothing step, then an ultra-fine finishing polish on a DA buffer.
Defect removal
80% to near 100%, though very deep etched defects may remain to protect clear coat thickness.
Best for
Show cars, classic vehicles, or heavily neglected, soft or damaged paint that needs maximum clarity and a mirror finish. Modern factory clear coats are thin, so 3-step is much less common today.
Time
Up to 6 hours.

How we approach the work

  1. 1

    Decontaminate first

    Loose dirt and bonded contaminants are removed before a polishing pad touches the paint.

  2. 2

    Work through the stages

    Heavier compounds address defects; finer polishing refines the finish. The number of stages depends on the paint.

  3. 3

    Assess what is safe

    Deep scratches may be too severe to remove safely. We discuss what can be improved without overworking the clear coat.

Stage-based pricing

Level 1 paint correction is included in our Standard, Signature and Ultimate Ceramic Coating packages. Additional stages of paint correction are $300 to $600, depending on condition, and are discussed with you after inspection, before any work is done.

Related services

Discuss your location

Ask about paint correction